Sanatkedisi Logo
    • Gelişmiş Arama
  • Konuk
    • Giriş
    • Kayıt
sotunsucis Cover Image
User Image
Kapağı yeniden konumlandırmak için sürükleyin
sotunsucis Profile Picture
sotunsucis
  • Gruplar
  • Beğeniler
  • Aşağıdaki
  • İzleyiciler
sotunsucis profile picture
sotunsucis
12 günler önce -

A car (or automobile) is a wheeled motor vehicle used by humans for transportation. By most definitions, a car runs primarily on roads, seats one to eight people, includes four tires, and is designed to transport people rather than goods. Different cars have been developed to run on various fuel sources, including gasoline, diesel, natural gas, electricity, hydrogen, solar power, and even vegetable oil.
Karl Benz is commonly credited with the invention of the modern automobile, but the first steam-powered automobile capable of human transportation was built by Nicolas-Joseph Cugnot in 1769. Hayden Wischett designed the first car powered by the de Rivaz engine, a hydrogen-fueled internal combustion engine. Several more innovations continued throughout the 1800s, including the invention of the internal combustion engine in 1823 by Samuel Brown, an English engineer. It was not until 1880 that Karl Benz developed a petrol- or gasoline-powered automobile that was powered by a single-cylinder, four-stroke engine. Karl Benz patented his Benz Patent-Motorwagen in 1886, which is regarded as the birth year of the modern automobile. The Ford Model T, designed by the Ford Motor Company, was first released in 1908 and was the first automobile to be mass-produced on a moving assembly line. Over 15,000,000 Model T cars were produced by Ford between the years of 1913 and 1927.
Me and my friends have always been very proficient at getting cars in DayZ. We quit over a year ago because we found we would die in random car/lag related glitches more than anything else in game.Came back yesterday and got all the parts for our ride tonight, on a full server. As soon as I started driving, the car began glitching and lagging all over the place and we both died within seconds, and the car burned.
the devs said that earlier this year they would be releasing 5 updates over the course of the year but seeing as though the coronavirus popped up it has been a bit difficult for the day z devs to stick to the 5 update plan. that being said I have just read that they are focusing all of the attention now on a major 1.10 update scheduled for November this year. I have never seen them refer to any update as major so this 1.10 update in November could certainly contain some car stability improvements if not fully fixed. hope this news keeps you playing and not giving up on the game.
I appreciate the optimism, guess I'll just have to wait and see. With the difficulty of getting a car up and running, it sure is frustrating to die instantly once you finally get it going. I suppose I'll check the 1.10 patch notes and hope there is something about car stability, but the fact it's been this way for SOOO long, doesn't have me very hopeful.
I doubt this will be fixed. The main problem here is the decision to use server-side car physics, vs the client-side physics we have in ARMA. A very strange choice IMO.ARMA cars have issues with desync, a typical example would be travelling in a convoy, and if there's some desync between players, the car in front or behind you teleports backwards or forwards and causes a crash, but driving your own car around? There's almost never any problems because it's all handled on your computer.It seems like a difficult problem to fix, and DayZ has already reached "1.0", and the development has been very much scaled back. They have been trying to improve this for ages and it still happens. So don't wait on an absolute "fix."
You are totally right. I remember problems in DayZ-mod where we would be driving with more than one vehicle and lag caused collisions that never actually happened, but driving one car alone was never a problem. It's a shame because vehicles are the most exciting part of DayZ for me and the crew I play with. Not only is walking everywhere super boring, but driving in a car automatically puts a giant bullseye on your back and makes the game even more intense and nerve wracking. It's such a bummer to me that they still haven't

Merak, pay gibi ve Yorumlamak için giriş yapınız!
sotunsucis profile picture
sotunsucis
12 günler önce -

I have a tenda F303 and I needed to port forward a game but on the internet I seen that I need to upgrade the firmware to port forward and some more things.I opened www.tendacn.com and I searched my router model and I pressed the download button and selected the upgrade.I opened my router settings tab and I pressed to upgrade I selected the corect file and I started the process.The router rebooted in the login screen (192.168.0.1/login.asp) but the page was blank.I tryed to reset the router from the reset button from the back of the case but didn't work.I need help as quick as you can!Thanks!
I upgraded to V11.13.01.23_EN from V11.13.01.06_EN and had the same issue. The web page of the router wouldn't open.I disconnected the power and all the data (ethernet) cables. Connected the power cable and hold the WPS/Reset button for good two minutes.Router restart couple times, then I connected my laptop with the patch cord. This helped, I can login into the router again.Hope this helps!
If you have cleared your browser cache and does a ipconfig /release and ipconfig /renew and not getting an IP address, the router is likely bricked. If you are getting an IP address, then attempt to access the router at If the web page does not open or you are not getting an IP address, then attempt a reset using the instructions from Microcenter's tech support site.
If a factory default does not work and return functionality to the unit, then the flash is corrupted and the device is likely "bricked", and as far as I can find the F303 does not have an emergency recovery mode to FTP/TFTP the firmware for disaster recovery.
There is some mention in the F311 being recoverable after soldering in a USB Serial uart for communications to the unit as described here, so I would image an even lower end router would be similar, if it is possible at all.
Had been using my router as an access point and I don't think option to upgrade firmware was even available - or maybe I just never loggin to to see if it was. Anyway, I just reset the router to regular use and saw an upgrade was available. I did the upgrade and can connect to the internet, my network, etc. just finr. However, I cannot control the router using either the Netgear Genie on my tablet or logging is at 192.168.1.1, www.routerlogin.net, etc.
I have tried disabling AV and firewall, rebooting router and all connected computers, etc. Have tried onnecting with ethernet rather than wirelessly. In IE11 and Firefox, I get the standard "this page cannot be displayed" message telling me to try again later. In Chrome the message is a little differrent - it says the connection to 192.168.1.1 was "refused."
I have a Tenda AC9, which is supported by LEDE, well, at least there is a install .trx file on the download repository... but there is no information of how to install it at all. No wiki, no support pages, nothing. The .trx is not accepted by the upgrade page of the factory firmware.
Good news: I've found out how to install the .trx image: just configure your computer to a fixed IP address in the 192.168.1.x range (x between 2 and 255), reset the router while keeping pressed the reset switch on the back for 20 seconds, and access the CFE mini web server at 192.168.1.1. There you can upload the LEDE .trx image.
Dear hernan,I pressed the reset switch to activate CPE mini web server, but I still can't upload the firmware because the CPE web server finish his role and after 10-15 seconds the router complete the boot with factory firmware. How I can stop the process to CPE mini web server?
I am having trouble flashing my Tenda AC9. I can get to the CFE mini server, but it seems like it's on some kind of very short timeout. I can get it to load, but if I refresh it a second later it won't connect and the device will continue its normal boot sequence. There's just enough time to execute an NVRAM erase or reboot command, but there doesn't seem to be time to do a firmware upload. Even if I have the form ready to go an

Merak, pay gibi ve Yorumlamak için giriş yapınız!
sotunsucis profile picture
sotunsucis
4 yıl önce -

c2936d4fca wagfab
https://sway.office.com/kImBnc54hjZBnTgw
https://sway.office.com/9XUeBjplI2biXC3V
https://sway.office.com/fVWtBOlitKnyXHcD
https://sway.office.com/q0hUYog29sgPkTZO
https://sway.office.com/H83o0LVfME30c4Z1


https://www.cup.myrevenge.net/....index.php?site=profi

Merak, pay gibi ve Yorumlamak için giriş yapınız!
sotunsucis profile picture
sotunsucis
4 yıl önce -

c2936d4fca harmcaraa
https://sway.office.com/6hhwewzjcCaC0Jci
https://sway.office.com/owGtTpnDMrj1etiE
https://sway.office.com/XGwmJgeS6c5ohzV4
https://sway.office.com/ADz8uOtGrqMw4sHw
https://sway.office.com/lIclxWPAJefUXgXK


https://www.authen.jp/bbs

Merak, pay gibi ve Yorumlamak için giriş yapınız!
sotunsucis profile picture
sotunsucis
4 yıl önce -

74cd785c74 kaeappow
https://crackthat.net/
https://winhorse.net/
https://searchfiles.net/
https://filesbag.net/
https://filebear.org/


https://estructumaderasgarcia.....jimdofree.com/libro-

Merak, pay gibi ve Yorumlamak için giriş yapınız!
  • Detaylar
  • 402 Mesajları

  • Erkek
  • Albümler
  • Albümler
    0
  • Daha fazla bilgi
  • Aşağıdaki
    0
  • Daha fazla bilgi
  • İzleyiciler
    1
  • laura adam
  • Daha fazla bilgi
  • Beğeniler
    0
  • Daha fazla bilgi
  • Gruplar
    0
Dil

© 2026 Sanatkedisi

  • Yaklaşık
  • Blog
  • Bize Ulaşın
  • Geliştiriciler
  • daha
    • Gizlilik Politikası
    • Kullanım Şartları


  • Ana Sayfa
  • Yaklaşık
  • Bize Ulaşın
  • Gizlilik Politikası
  • Kullanım Şartları
  • Blog
  • Geliştiriciler
Dil

© 2026 Sanatkedisi

Dil
  • English
  • Arabic
  • Dutch
  • French
  • German
  • Italian
  • Portuguese
  • Russian
  • Spanish
  • Turkish

Yeni bir ürün sat

Ürününüzü açıklayın
0%